PSC Ep. 92: How do I winterize my main drain line?

PSC Ep. 92: How do I winterize my main drain line?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: 
I’m in the process of closing my pool. How do I winterize my main drain line?

Since closing the main drain isn’t the first step in the winterizing process, we’ll assume that the water has been drained below the skimmer and return jets. And that those lines have already been winterized.

There are a couple of different ways to winterize the main drain line and it depends on how the main drain is plumbed. We’ll start with the most common.

The majority of main drains have a line that runs from the drain back to the equipment. If you have this style, you’ll need a blower. The first step will be isolating the line that runs from the pump back to the main drain. This will require that the valve for the main drain is open and the skimmer line is closed.

With the pump lid removed you can insert the blower hose in the strainer housing and into the suction port. Turn the blower on and wait for the bubbles to emerge from the main drain. Let that continue for 30 seconds or so and with the blower is still running, close the valve. This will create an air pocket and the main drain will remain free of water.

So that covers the most common type of main drain line. But we’ve recently had some questions about another configuration.

 

click here to view our swimming pool solar, winter, and safety covers

 

The other type of main drain line connects directly to a skimmer. Some skimmers have two holes in the bottom. The hole furthest away from the pool is the line that goes back to the pump. The hole closest to the pool would be the one that connects to the main drain. This is called an equalizer line. 

Since you drained the pool below the skimmer, the water level in the main drain pipe should be lower as well. If the water in the pipe freezes, it will expand up the partially empty line and not out. To close off the line, you can thread in a gizmo or use a plug. 

For some insurance, you can get some foam rope, also called foam backer rod, and feed that into the line before it’s capped. The closed-cell foam will compress and absorb the ice expansion and help prevent the ice from expanding outward.

If you have any comments or methods for winterizing a main drain line, please leave a comment down below. Please remember to like and subscribe and for all your pool needs, visit us over at Inyopools.com.

3 thoughts on “PSC Ep. 92: How do I winterize my main drain line?

Leave a Reply

Your email address will not be published. Required fields are marked *

Recommended Resources

PSC Ep. 74: In what order do I add winterizing chemicals?

PSC Ep. 74: In what order do I add winterizing chemicals?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  I recently purchased a winterizing chemical...
Read Now

Should I Close My Pool Or Leave It Open For Winter?

As fall approaches and the leaves on your trees begin to change colors, there is one question pool owners ask themselves...
Read Now
Main Drains in Above Ground Pools

Main Drains in Above Ground Pools

Fortunately for all of us, above ground swimming pools now mostly come with decent equipment at least. What I mean by...
Read Now
What should I use to test my pool water?

PSC Ep. 88: What should I use to test my pool water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  What do you recommend I use...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2020 INYOpools All rights reserved